Clear Non Abrasive Grip Tape

Clear Non Abrasive Grip Tape Material: clear PEVA, soft PVC, or PU-style embossed film Surface: soft embossed, non-abrasive, no loose grit Color: transparent clear, translucent tint available Common size: 25 mm, 50 mm, 75 mm, 100 mm widths Adhesive: water-resistant acrylic pressure-sensitive adhesive Use range: bathroom, shower, poolside, locker room, marine leisure area Contact Us

Hazard Barrier Company is a manufacturer of clear non abrasive grip tape for wet-area surfaces where comfort matters as much as traction. This transparent soft embossed anti slip tape is made for bathrooms, shower rooms, locker rooms, poolside walkways, boat leisure areas, and smooth indoor floors. With a typical 0.55 mm to 0.85 mm soft film structure, it improves light to medium-duty grip without the rough scratch of mineral grit, helping keep tile, acrylic, fiberglass, sealed wood, and smooth coated surfaces visible.

Product Photos

Technical Data Sheet

Product Overview

This clear non abrasive grip tape is developed for wet areas where a sharp sandpaper feel is not suitable. In places such as shower rooms, changing areas, pool surroundings, and boat cabins, people often walk barefoot or wear soft slippers. A coarse mineral grit tape may provide strong bite, but it can also feel harsh, collect dirt more easily, or scrape footwear and skin. This product takes a different approach. It uses a soft raised texture instead of aluminum oxide, quartz sand, or loose abrasive particles.

The embossed surface height is typically 0.20 mm to 0.35 mm. That gives the film enough surface contact for light to medium wet-area walking, while keeping the touch smoother than heavy grit tape. The transparent film also helps preserve the look of ceramic tile, acrylic shower bases, fiberglass steps, sealed wood, smooth metal, and lightly coated leisure flooring. During sample wet wiping, no visible mineral grit shedding is observed, which makes the tape easier to maintain in areas that need regular cleaning.

Hazard Barrier Company supplies this soft textured waterproof tape in roll form, slit widths, or cut pieces. Common widths include 25 mm, 50 mm, 75 mm, and 100 mm, with +/-1 mm typical slitting control. Before bulk use, samples can be checked for surface feel, transparency, adhesive response, curved surface fitting, and wet-foot comfort. This is useful when the tape needs to fit shower thresholds, rounded boat steps, acrylic edges, or fiberglass surfaces.

Benefits

• Soft embossed surface improves grip without the harsh scrape of mineral grit tape.
• Barefoot friendly grip surface feels more comfortable on wet bathroom, shower, and poolside floors.
• No loose mineral grit, so the surface is easier to wipe and less likely to shed particles.
• Transparent film helps keep tile, fiberglass, acrylic, sealed wood, or coated surfaces visible.
• Flexible backing can follow gentle curves on shower edges, boat steps, and rounded wet-area corners.
• Typical peel adhesion range of 8 to 14 N/25 mm after 24 h supports stable bonding on suitable smooth surfaces.
• A 24 h to 48 h curing period before wet use helps reduce early edge lifting in damp areas.
• Light to medium-duty traction makes it suitable for wet walking zones, not forklift routes or industrial ramps.

 Applications

1. Bathroom floors, shower rooms, bathtub steps, and wet changing areas where bare feet need a softer grip.
2. Locker rooms, spa areas, gyms, hotels, and rental properties with smooth indoor wet-zone flooring.
3. Poolside walking zones where a clear, soft textured surface is preferred over rough grit tape.
4. Boat cabins, swim platforms, leisure decks, and marine steps with light to medium foot traffic.
5. Acrylic, fiberglass, ceramic tile, sealed wood, metal, and smooth painted surfaces after sample testing.
6. Curved thresholds, rounded step edges, and narrow wet-area paths requiring custom width slitting.

What Should Be Checked Before Applying Clear Non Abrasive Grip Tape in Wet Areas?

Before applying clear non abrasive grip tape, the surface should be clean, dry, stable, and free from soap residue, wax, oil, dust, or loose coating. In wet areas, the edge is usually the first place to fail if water, cleaning liquid, or repeated foot pressure reaches the side of the tape too early. For slightly curved surfaces, press a sample by hand and check whether the film follows the curve without lifting back. After installation, allow 24 h to 48 h before wet use to support adhesion and reduce early edge lifting.

How Does Soft Embossed Texture Improve Grip Without Scratching Bare Feet?

The soft embossed texture improves grip through raised surface contact rather than sharp mineral particles. When bare feet, slippers, or pool shoes step on the tape, the pattern increases friction while still feeling smoother than coarse grit tape. The typical COF reference range is 0.75 to 0.95 in dry sample checks and 0.55 to 0.75 in wet sample checks, depending on surface and test condition. This makes it a practical non abrasive shower grip tape option for comfort-focused wet areas, but not a replacement for abrasive tape on industrial ramps or forklift routes.

FAQ

Is this tape the same as abrasive grit anti-slip tape?

No. It uses a soft embossed non-abrasive surface, not mineral grit or coarse sand particles. It is made for comfort, transparency, and light to medium-duty wet-area traction.

Can it be used inside a shower room?

Yes, if the surface is clean, dry, smooth, and stable before installation. A 24 h to 48 h curing time before wet use is recommended.

Will the clear surface become completely invisible?

No. The tape is transparent, but the embossed texture may show a slight pattern under side lighting or on glossy surfaces.

Can the width be customized for bulk projects?

Yes. Hazard Barrier Company can supply common widths such as 25 mm, 50 mm, 75 mm, and 100 mm, with custom slitting available for project use.